Камень для заточки ножей Waterstone 3000 8000 зернистость, кремниевое нескользящее основание для кухонных ножей, охотничьих ножей, ножниц, бритв, Sw

2 GRIT SIDES ENSURE BEST SHARPENING: The Sharpening Stone Device has excellent features of self-sharpening, particle distribution is consistent and precise hardness. The 3000 grit side is for re-profile cutting edge of knife, refine the dull edge of blade and damaged spaceof blade quickly, the 8000 grit side is for fine grinding, remove the burr and straighten the cutting edge of knives quickly, enhance the edge to be sharp and polished. makes your knives edge shiny like a mirror.
HIGH QUALITY MATERIAL CAREFULLY SELECTED: The Sharpening Stone is made of White Corundum being fired with special formula by temperature of 1000+ Celsius inside industrial oven, and then cooled down by air dry. Every Sharpening Stone Device is produced with 17 processes, which is grinded precisely and has three inspection procedures to guarantee the quality.
MUST HAVE ONE FOR KNIFE FANS: Reduce metal from your knives blade the least amount possible due to the white corundum material, enables your knives to be in good condition and protects your knives from any damage
SUITABLE FOR MOST GRINDING: Suitable for kitchen knives, kitchen scissors, sushi knives, pocket knives, bread knives, straight razor cutting class knives grinding, hunting knives, precision tool, planer tool and chisels.
before use, you should read our instructions to produce the sharpest blade:
Step 1: soak the sharpening stone in Water for 5-10 minutes, place it on a sturdy flat surface. (drop Water on the sharpening stone surface while sharpening, although the it has been soaked)
Step2: 3000 grit side for sharpening:
A: Dominate hand is to maintain the proper angle of the blade, the opposite hand use 3 or 4 fingers to apply pressure, have the back of the blade lead the knife across the entire whetstone surface.
B: works with one side at a time, once you feel a slight burr on the opposite side of the edge, then change side until you feel slight burr too, using short upward motion remove the burrs.
C: when looking directly at the blade, you should see blade line.
Step3: 8000 grit is for honing, repeat the same way as above.
The cutting of knife tends to fold over with use, which make it dull, so honing is used, honing straightens the cutting edge of knife, and keeps knife working well before it is necessary to grind away material and re-profile the blade of cutting knife.
as you sharpening on 3000 grit side, there will be small scratches and still burr, so you can smoothing out scratches and remove burr with 8000 grit side, create a more polished, sharper edge.
Color: Light Green + White
Package Contents:
1 x Sharpening Stone
1 x base Holder
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.